The Great Pyramid, Part 9

“The builders paid special attention to the corner stone’s. They had to support and absorb the
enormous weight of the pyramid that pressed down and sideways. To achieve this, they have to
interlock with the stones lying on top of them and below them. These stones were especially massive
and reached far into the core masonry. Next a second course was laid on top. Each joint had to be
overlapped not only by the stone on top but likewise by the one underneath as well. Subsequently the
stones were added, one course after the other. Each time care was taken, that the corner stones were
well interlocked with the core masonry and the outer casing stones were also well incorporated into the
whole structure.” (“
Building the Great Pyramid”)

Each course was meticulously leveled and double checked before the next course was laid. In this
diagram however we have purposely left off some of the stones in order to illustrate the progression of
the work, note closely how the blocks were designed to over-lap each other, with especially large (long)
header blocks” periodically added for extra strength and stability.

As we had previously pointed out there is a distinction made between the
Pavement and the Platform
even though both surface heights are the same. We are not however as particularly interested in the
details of the Pavement as we are in the Platform, as the Platform has a more direct relationship to the
Pyramid and the various time features incorporated in it.

The Platform extends about 16 ½ inches beyond the casing stones all around the Pyramid, whereas the
pavement extends about 30 feet out, that is at least on the north face as far as we know, over on the
east side of the Pyramid along with the White Tura Limestone’s used for the pavement you will likewise
find the remains of
the basalt pavement which once covered the courtyard of the Valley Temple.

Getting back to the Platform it will be noticed that the Platform is likewise marked by the particular
angle in which the front outside edges were cut, particularly where it adjuncts up next to the
pavement, this particular angle is roughly about 70 to 75 degrees I believe, that is in comparison with
the casing stones which were cut at a 51 degree angle. The true purpose behind the use of this
particular angle is not exactly known; nevertheless this angle can be readily discerned in the following
two photos.

The importance of understanding where
precisely certain measurements begin and end cannot be
understated, some of which begin their calculations from outside the Pyramid up its face to the
original door opening beginning from the
Mean Socket Floor Level while still others are calculated
from the
Platform or Fundament Levels.

We will continue once again with our next post.

                                      PREVIOUS PAGE  INDEX  NEXT PAGE